Kitchen cabinet drawers are really an easy way to arrange your kitchenware as they slide in and out effortlessly. However, if you are making them yourself, or installing a new front on an existing drawer, you need to be meticulous with the measurements or it may affect the movement. Let us first begin with what all you may need to create kitchen cabinet drawer fronts on your own.
Kitchen cabinet drawer hardware
Kitchen cabinet drawer hardware would include the following: Cabinet drawer slides, cabinet knobs, cabinet handles or pulls and cabinet bolts. Depending on the slides you want, you could select from undermount slides, ball bearing slides, roller bearing slides, file drawer slides, pencil drawer slides etc. For example, if you have a large drawer for stacking dishes etc., then you should go for file drawer slides. It is easy to select the right slides for your drawer with little guidance from your local hardware shop.
Knobs can be fancy or simple bar pulls depending on your kitchen styling. Drilling machine, table saw, chop saw, radial arm saw, orbital sander, router, clamps, nuts and bolts etc. are the necessary hardware items you need for such work, so keep them handy.
Working on your kitchen cabinet drawers
Now you can begin working on your kitchen cabinet drawers. In order to get a new kitchen cabinet drawer front, you can follow the steps below:
1. The size of drawer front needs to be measured. Once you have the exact measurements, cut the wood length using radial arm saw and width using table saw.
2. Once you have routed each edge with a router, use a sander to smoothen imperfect finish.
3. Varnish it.
4. Paint it according to your style.
5. Now fix the drawer front to your four-sided box drawer. You will have to drill pilot holes from the inside of the drawers keeping the backside of the new front stuck. Be careful not to drill right up to outside. Attach the drawer fronts now using wood screws.
6. To attach the drawer pull, drill holes in the center of the drawer front through to the inside of the drawer. Firmly attach the drawer pull to the center of the drawer front.
Replacement of kitchen cabinet drawers
In case you just want replacement of kitchen cabinet drawers, you can consider two options. If you drawer is still in good condition, you may consider replacing only the drawer front instead of the entire thing. Not only will it save your extra effort and time, but also money spent on hardware etc. All you need to do is:
1. Pull open the drawers. Check the screws that hold up the front to the drawer.
2. Firmly loosen and remove the screws taking care not to damage the inside of the drawer.
3. Gently and slowly pull the front off the drawer when the screws are loose enough.
4. Measure the new drawer front against the old one to match the dimensions. Now place the new drawer front and firmly screw it onto the drawer.
If your drawer needs complete replacement, you need to:
1. Pull out the existing drawers from their position. The new drawers should be measured against the old ones to get the dimensions right.
2. Once sure, fix the slides on the outside and check if they easily move against the existing tracks.
3. If the drawer does not fit in properly, remove the tracks and reposition them to get the right slip of the slides on the drawers.
In case you do not have time or skill to make new drawers or front, replacement kitchen cabinet drawers are available to easily replace your old drawers and avoid the hassle of dismantling any existing kitchen units. Check with your local hardware shop or just browse online.
Kitchen cabinet drawer organizers
Once your drawers are in place, you may want to quickly dump in the stuff that has been lying around the kitchen for long. But think before you do so, for it will only add to clutter. So, get your drawers organized first with kitchen cabinet drawer organizers.
There are drawer dividers, cubes, knife sleeves, drop-in drawer pegs and flatware organizers available to keep your kitchen stuff placed neatly. Flatware organizers are great for your silverware and other cutlery. You can choose to have few or many compartments. Knife sleeves are great for safety and may be modular to accommodate more than one knife. Utensil dividers and plate holders are excellent way of keeping the utensils neatly stacked in one drawer.
As a Design+Build General Contractor, I offer my clients a one-stop shopping approach to all of their home remodeling projects. I work with my clients from initial conception of a project through its completion. Every aspect of the job is managed by me and my professional crew. You will be included in every step of the design process until the final drawings are completed. No detail is left to chance. General Contractor Specializing in Kitchen & Bathroom Design and Remodeling Throughout the Los Angeles area.
Written By:
Offer Steuer
President
OTM Designs & Remodeling, Inc.
For more information you may contact us via email at service@otm1designs.com or you may call us at 888-981-1415. Our website is www.otm1designs.com